SMART WEIGH

How to check loadcell of multihead weigher

Time: 2020-09-10
Summary: Loadcell is a significant part of multihead weigher.
How to check loadcell of multihead weigher
Tools to be prepared: 
M10 sleeve
No.4 hexagon wrench 
No.5 hexagon wrench 
No.6 hexagon wrench 
cross screwdriver
1.Remove aluminum box from multihead weigher .
2.Observe the gap between sensor protection sheet.
3.Hang back weigh hopper and check whether screws on both sides of weigh hopper will touch the aluminum specimen box or not. If yes,loosen the hanging screws to adjust.

Next: How to check loadcell of multihead weigher